All MIBs › Nortel-MsCarrier-MscPassport-HdlcTransparentMIB › mscHtdsPlcSetupPriority
mscHtdsPlcSetupPriority
Module: Nortel-MsCarrier-MscPassport-HdlcTransparentMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-HdlcTransparentMIB::mscHtdsPlcSetupPriority
OID (numeric): 1.3.6.1.4.1.562.36.2.1.82.3.10.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute gives the priority at which a path is established. Zero(0) is the highest priority and four(4) is the lowest. When PORS establishes a path through the network, it uses the setupPriority attribute to determine its potential for bumping established paths to acquire their bandwidth. The holdingPriority, a complementary attribute of this component, indicates the priority a path maintains once it is established. A new path can bump an existing path if the new path's setupPriority is higher (numerically less) than the existing path's holdingPriority.
What is mscHtdsPlcSetupPriority?
The priority (0=highest to 4=lowest, default 2) at which this path attempts to establish itself, determining its ability to bump other established paths for bandwidth; a new path can bump an existing one if its setupPriority is numerically less than that path's holdingPriority. An admin raises this priority (lowers the number) for a PLC that must reliably win bandwidth contention over lower-priority connections.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.82.3.10.1.3 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-HdlcTransparentMIB::mscHtdsPlcSetupPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.82.3.10.1.3.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-HdlcTransparentMIB::mscHtdsPlcSetupPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.82.3.10.1.3.1 i <value>
Start monitoring Nortel MsCarrier Passport switch (HDLC-transparent circuit emulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-HdlcTransparentMIB::mscHtdsPlcSetupPriority OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier Passport switch (HDLC-transparent circuit emulation) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.82 | mscHtds | Nortel-MsCarrier-MscPassport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.82.3 | mscHtdsPlc | Nortel-MsCarrier-MscPassport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.82.3.10 | mscHtdsPlcProvTable | Nortel-MsCarrier-MscPassport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.82.3.10.1 | mscHtdsPlcProvEntry | Nortel-MsCarrier-MscPassport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.82.3.10.1.3 | mscHtdsPlcSetupPriority | Nortel-MsCarrier-MscPassport-HdlcTransparentMIB |