All MIBs › Nortel-MsCarrier-MscPassport-HdlcTransparentMIB › mscHtdsPlcRequiredRxBandwidth
mscHtdsPlcRequiredRxBandwidth
Module: Nortel-MsCarrier-MscPassport-HdlcTransparentMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-HdlcTransparentMIB::mscHtdsPlcRequiredRxBandwidth
OID (numeric): 1.3.6.1.4.1.562.36.2.1.82.3.10.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute gives the bandwidth (in bits per second) reserved by a path on each of trunks of its route. This attribute represents the bandwidth for traffic incoming from the remote end point. This value should be chosen to achieve the amount of statistical bandwidth sharing that is desired by the network administration. This reservation is not enforced and is used to determine how many paths can be supported on a trunk. Both ends should be provisioned with the correct values allowing for the fact that Transmit at this end represents Receive at the remote end. Note that when the values do not correspond the originating end of the connection determines the value.
What is mscHtdsPlcRequiredRxBandwidth?
The bandwidth, in bits per second (default 64000), this path reserves on every trunk along its route for traffic incoming from the remote end point; like mscHtdsPlcRequiredTxBandwidth this reservation isn't strictly enforced but sizes how many paths a trunk can carry. Both ends should agree on this value, with the originating end's provisioning taking precedence if they don't.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.82.3.10.1.6 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-HdlcTransparentMIB::mscHtdsPlcRequiredRxBandwidth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.82.3.10.1.6.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-HdlcTransparentMIB::mscHtdsPlcRequiredRxBandwidth.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.82.3.10.1.6.1 i <value>
Start monitoring Nortel MsCarrier Passport switch (HDLC-transparent circuit emulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-HdlcTransparentMIB::mscHtdsPlcRequiredRxBandwidth OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier Passport switch (HDLC-transparent circuit emulation) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.82 | mscHtds | Nortel-MsCarrier-MscPassport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.82.3 | mscHtdsPlc | Nortel-MsCarrier-MscPassport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.82.3.10 | mscHtdsPlcProvTable | Nortel-MsCarrier-MscPassport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.82.3.10.1 | mscHtdsPlcProvEntry | Nortel-MsCarrier-MscPassport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.82.3.10.1.6 | mscHtdsPlcRequiredRxBandwidth | Nortel-MsCarrier-MscPassport-HdlcTransparentMIB |