All MIBs › Nortel-MsCarrier-MscPassport-HdlcTransparentMIB › mscHtdsLCoOverrideRemoteName
mscHtdsLCoOverrideRemoteName
Module: Nortel-MsCarrier-MscPassport-HdlcTransparentMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-HdlcTransparentMIB::mscHtdsLCoOverrideRemoteName
OID (numeric): 1.3.6.1.4.1.562.36.2.1.82.4.10.1.2
Node type: OBJECT-TYPE
Type: AsciiString
Access: read-write
Description: If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this attribute and then lock/unlock the service component which will result in this new overrideRemoteName being used as if it had been provisioned into the PLC remoteName. The advantage of this attribute is that the connection's remoteName can be changed immediately without having to 'activate prov' but the disadvantage is that the overrideRemoteName is not permanent and if the card or switch is reset the override will be lost.
What is mscHtdsLCoOverrideRemoteName?
A remoteName value that overrides a blank mscHtdsPlcRemoteName once the service component is locked and unlocked, letting an admin change the effective remote endpoint immediately without an 'activate prov' cycle; the trade-off is that this override is lost if the card or switch resets. Useful for a quick temporary redirect of a connection's far end without committing a permanent provisioning change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.82.4.10.1.2 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-HdlcTransparentMIB::mscHtdsLCoOverrideRemoteName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.82.4.10.1.2.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-HdlcTransparentMIB::mscHtdsLCoOverrideRemoteName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.82.4.10.1.2.1 s <value>
Start monitoring Nortel MsCarrier Passport switch (HDLC-transparent circuit emulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-HdlcTransparentMIB::mscHtdsLCoOverrideRemoteName OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier Passport switch (HDLC-transparent circuit emulation) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.82 | mscHtds | Nortel-MsCarrier-MscPassport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.82.4 | mscHtdsLCo | Nortel-MsCarrier-MscPassport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.82.4.10 | mscHtdsLCoPathDataTable | Nortel-MsCarrier-MscPassport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.82.4.10.1 | mscHtdsLCoPathDataEntry | Nortel-MsCarrier-MscPassport-HdlcTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.82.4.10.1.2 | mscHtdsLCoOverrideRemoteName | Nortel-MsCarrier-MscPassport-HdlcTransparentMIB |