Nortel-MsCarrier-MscPassport-Frf5EpMIB :: mscMcsMgrFrf5EpGEpEpdExcessBurstSize

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-Frf5EpMIB › mscMcsMgrFrf5EpGEpEpdExcessBurstSize

mscMcsMgrFrf5EpGEpEpdExcessBurstSize

Module: Nortel-MsCarrier-MscPassport-Frf5EpMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-Frf5EpMIB::mscMcsMgrFrf5EpGEpEpdExcessBurstSize

OID (numeric): 1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.10

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the excess burst size (Be), and represents the amount of uncommitted data that the network FRF.5 ATM VCC agrees to transfer under normal conditions. A conservative Be value would be the sum of the Bes of all the individual FrAtm Dlcis multiplexed by the VCC. The be is converted into ATM service parameters according to the conversion policy specified by the connectionTransferPriority attribute. The conversion policy is defined under the ModuleData FrameRelayService AtmNetworking TransferPriority/n component.

What is mscMcsMgrFrf5EpGEpEpdExcessBurstSize?

The provisioned Excess Burst Size (Be, default 0 bits) for this end point, ideally set to the sum of the Be values of the Frame Relay DLCIs it multiplexes, converted into ATM parameters via the configured conversion policy.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.10
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-Frf5EpMIB::mscMcsMgrFrf5EpGEpEpdExcessBurstSize

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.10.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-Frf5EpMIB::mscMcsMgrFrf5EpGEpEpdExcessBurstSize.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.10.1 i <value>

Start monitoring Nortel MsCarrier Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-Frf5EpMIB::mscMcsMgrFrf5EpGEpEpdExcessBurstSize OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier Passport switches from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.122mscMcsMgrNortel-MsCarrier-MscPassport-McsMgrMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.122.14mscMcsMgrFrf5EpGNortel-MsCarrier-MscPassport-Frf5EpMIB
1.3.6.1.4.1.562.36.2.1.122.14.3mscMcsMgrFrf5EpGEpNortel-MsCarrier-MscPassport-Frf5EpMIB
1.3.6.1.4.1.562.36.2.1.122.14.3.3mscMcsMgrFrf5EpGEpEpdNortel-MsCarrier-MscPassport-Frf5EpMIB
1.3.6.1.4.1.562.36.2.1.122.14.3.3.10mscMcsMgrFrf5EpGEpEpdProvTableNortel-MsCarrier-MscPassport-Frf5EpMIB
1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1mscMcsMgrFrf5EpGEpEpdProvEntryNortel-MsCarrier-MscPassport-Frf5EpMIB
1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.10mscMcsMgrFrf5EpGEpEpdExcessBurstSizeNortel-MsCarrier-MscPassport-Frf5EpMIB