Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB :: mscFrUniTraceReceiverName

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB › mscFrUniTraceReceiverName

mscFrUniTraceReceiverName

Module: Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB::mscFrUniTraceReceiverName

OID (numeric): 1.3.6.1.4.1.562.36.2.1.71.7.10.1.2

Node type: OBJECT-TYPE

Type: AsciiString

Access: read-write

Description: This attribute should be set to the name of the desired trace receiver before starting a trace session. All available trace receivers are listed under the Trace Rcvr/ component. This attribute cannot be set while a trace is active.

What is mscFrUniTraceReceiverName?

This read-write object specifies the name of the trace receiver that captured Frame Relay frames will be forwarded to, chosen from the receivers listed under the Trace Rcvr component. An admin must set it before starting a trace session, since the object is locked and cannot be changed while a trace is already active. Setting mscFrUniTraceReceiverName to Rcvr1 directs a subsequent trace session's captured frames to that specific configured receiver.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.71.7.10.1.2
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB::mscFrUniTraceReceiverName

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.71.7.10.1.2.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB::mscFrUniTraceReceiverName.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.71.7.10.1.2.1 s <value>

Start monitoring Nortel MsCarrier MscPassport switch (Frame Relay UNI diagnostic trace) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB::mscFrUniTraceReceiverName OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch (Frame Relay UNI diagnostic trace) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.71mscFrUniNortel-MsCarrier-MscPassport-FrameRelayUniMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.71.7mscFrUniTraceNortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB
1.3.6.1.4.1.562.36.2.1.71.7.10mscFrUniTraceOperationalTableNortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB
1.3.6.1.4.1.562.36.2.1.71.7.10.1mscFrUniTraceOperationalEntryNortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB
1.3.6.1.4.1.562.36.2.1.71.7.10.1.2mscFrUniTraceReceiverNameNortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB