All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB › mscFrUniTraceFilterTracedLength
mscFrUniTraceFilterTracedLength
Module: Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB::mscFrUniTraceFilterTracedLength
OID (numeric): 1.3.6.1.4.1.562.36.2.1.71.7.2.10.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the maximum number of bytes to trace per frame starting from the byte following the frame flag. If the frame length is longer than the value specified by this attribute, then the traced frame is truncated. This attribute can be set while a trace is active and takes effect immediately.
What is mscFrUniTraceFilterTracedLength?
This read-write object specifies the maximum number of bytes captured per frame in the trace, counted from the byte after the frame flag; longer frames are truncated to this length. Admins reduce it below the 2000-byte default to limit the volume of trace data sent to the receiver when only the frame header or first portion of payload is needed for diagnosis. Setting mscFrUniTraceFilterTracedLength to 64 would capture just the first 64 bytes of each traced frame, enough to see header and DLCI information without hauling full payloads to the trace receiver.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.71.7.2.10.1.4 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB::mscFrUniTraceFilterTracedLength
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.71.7.2.10.1.4.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB::mscFrUniTraceFilterTracedLength.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.71.7.2.10.1.4.1 i <value>
Start monitoring Nortel MsCarrier MscPassport switch (Frame Relay UNI diagnostic trace) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB::mscFrUniTraceFilterTracedLength OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch (Frame Relay UNI diagnostic trace) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.71 | mscFrUni | Nortel-MsCarrier-MscPassport-FrameRelayUniMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.71.7 | mscFrUniTrace | Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB |
| 1.3.6.1.4.1.562.36.2.1.71.7.2 | mscFrUniTraceFilter | Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB |
| 1.3.6.1.4.1.562.36.2.1.71.7.2.10 | mscFrUniTraceFilterOperationalTable | Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB |
| 1.3.6.1.4.1.562.36.2.1.71.7.2.10.1 | mscFrUniTraceFilterOperationalEntry | Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB |
| 1.3.6.1.4.1.562.36.2.1.71.7.2.10.1.4 | mscFrUniTraceFilterTracedLength | Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB |