All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB › mscFrUniTraceFilterDirection
mscFrUniTraceFilterDirection
Module: Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB::mscFrUniTraceFilterDirection
OID (numeric): 1.3.6.1.4.1.562.36.2.1.71.7.2.10.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: This attribute specifies the direction of the data to be traced as viewed by the service. The values can be egress, and/or ingress. An egress value indicates frames outbound from the service. An ingress value indicates frames inbound to the service. This attribute can be set while a trace is active and takes effect immediately.
Description of bits: egress(0) ingress(1)
What is mscFrUniTraceFilterDirection?
This read-write bitmask specifies which traffic direction, egress (outbound from the service) and/or ingress (inbound to the service), is captured by the trace, defaulting to both directions. Admins narrow it to one direction when troubleshooting a unidirectional problem, such as frames being dropped only on ingress, to reduce trace volume and focus the capture. Setting mscFrUniTraceFilterDirection to only the ingress bit would capture just the frames arriving into the service, excluding outbound traffic from the trace.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.71.7.2.10.1.3 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB::mscFrUniTraceFilterDirection
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.71.7.2.10.1.3.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB::mscFrUniTraceFilterDirection.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.71.7.2.10.1.3.1 s <value>
Start monitoring Nortel MsCarrier MscPassport switch (Frame Relay UNI diagnostic trace) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB::mscFrUniTraceFilterDirection OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch (Frame Relay UNI diagnostic trace) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.71 | mscFrUni | Nortel-MsCarrier-MscPassport-FrameRelayUniMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.71.7 | mscFrUniTrace | Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB |
| 1.3.6.1.4.1.562.36.2.1.71.7.2 | mscFrUniTraceFilter | Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB |
| 1.3.6.1.4.1.562.36.2.1.71.7.2.10 | mscFrUniTraceFilterOperationalTable | Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB |
| 1.3.6.1.4.1.562.36.2.1.71.7.2.10.1 | mscFrUniTraceFilterOperationalEntry | Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB |
| 1.3.6.1.4.1.562.36.2.1.71.7.2.10.1.3 | mscFrUniTraceFilterDirection | Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB |