Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB :: mscFrUniTraceDuration

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB › mscFrUniTraceDuration

mscFrUniTraceDuration

Module: Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB::mscFrUniTraceDuration

OID (numeric): 1.3.6.1.4.1.562.36.2.1.71.7.10.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the duration, in minutes, of a trace session. A value of 0 indicates unlimited duration in which case a trace session remains active until a stop command is issued. The default duration is 60 minutes. This attribute cannot be set while a trace is active.

What is mscFrUniTraceDuration?

This read-write object specifies the duration, in minutes, that a Frame Relay UNI trace session will run, with 0 meaning unlimited, running until manually stopped, and a default of 60 minutes. Like the receiver name, it cannot be changed while a trace is already active, so an admin must set the desired duration before starting the capture. Setting mscFrUniTraceDuration to 0 would let an admin run an open-ended trace session that keeps capturing until explicitly stopped, rather than the default 60-minute window.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.71.7.10.1.3
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB::mscFrUniTraceDuration

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.71.7.10.1.3.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB::mscFrUniTraceDuration.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.71.7.10.1.3.1 i <value>

Start monitoring Nortel MsCarrier MscPassport switch (Frame Relay UNI diagnostic trace) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB::mscFrUniTraceDuration OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch (Frame Relay UNI diagnostic trace) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.71mscFrUniNortel-MsCarrier-MscPassport-FrameRelayUniMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.71.7mscFrUniTraceNortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB
1.3.6.1.4.1.562.36.2.1.71.7.10mscFrUniTraceOperationalTableNortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB
1.3.6.1.4.1.562.36.2.1.71.7.10.1mscFrUniTraceOperationalEntryNortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB
1.3.6.1.4.1.562.36.2.1.71.7.10.1.3mscFrUniTraceDurationNortel-MsCarrier-MscPassport-FrameRelayUniTraceMIB