All MIBs › Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB › mscLpEE1ControlStatus
mscLpEE1ControlStatus
Module: Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB
OID (symbolic): Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB::mscLpEE1ControlStatus
OID (numeric): 1.3.6.1.4.1.562.36.2.1.12.29.15.1.6
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present.
The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked.
The value suspended indicates that the service has been administratively suspended.
Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
What is mscLpEE1ControlStatus?
This bitmask object reports the OSI Control status of the component, such as subjectToTest, partOfServicesLocked, reservedForTest, or suspended, with at most one value typically shown. Admins use this to understand administrative restrictions currently placed on the component beyond its basic lock state. A value of reservedForTest indicates the component is administratively unavailable because it's undergoing a test procedure, with its adminState correspondingly locked.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.29.15.1.6 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB::mscLpEE1ControlStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.29.15.1.6.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB::mscLpEE1ControlStatus.1
Start monitoring Nortel MsCarrier MscPassport switch (external E1 timing reference) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB::mscLpEE1ControlStatus OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch (external E1 timing reference) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.12 | mscLp | Nortel-MsCarrier-MscPassport-LogicalProcessorMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.29 | mscLpEE1 | Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB |
| 1.3.6.1.4.1.562.36.2.1.12.29.15 | mscLpEE1StateTable | Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB |
| 1.3.6.1.4.1.562.36.2.1.12.29.15.1 | mscLpEE1StateEntry | Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB |
| 1.3.6.1.4.1.562.36.2.1.12.29.15.1.6 | mscLpEE1ControlStatus | Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB |