All MIBs › Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB › mscLpEE1AvailabilityStatus
mscLpEE1AvailabilityStatus
Module: Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB
OID (symbolic): Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB::mscLpEE1AvailabilityStatus
OID (numeric): 1.3.6.1.4.1.562.36.2.1.12.29.15.1.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present.
The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled.
The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled.
The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled.
The value notInstalled indicates the resource is not present. The operationalState is disabled.
The value logFull is not used.
Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
What is mscLpEE1AvailabilityStatus?
This bitmask object reports the OSI Availability status of the component, such as inTest, failed, dependency, powerOff, offLine, offDuty, degraded, or notInstalled, with at most one value typically shown. Admins use this to get a specific reason why a component isn't fully available, complementing the coarser operationalState value. A reported value of failed indicates the component has an internal fault preventing it from operating, while dependency would instead point to another resource it depends on being unavailable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.29.15.1.4 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB::mscLpEE1AvailabilityStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.29.15.1.4.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB::mscLpEE1AvailabilityStatus.1
Start monitoring Nortel MsCarrier MscPassport switch (external E1 timing reference) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB::mscLpEE1AvailabilityStatus OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch (external E1 timing reference) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.12 | mscLp | Nortel-MsCarrier-MscPassport-LogicalProcessorMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.29 | mscLpEE1 | Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB |
| 1.3.6.1.4.1.562.36.2.1.12.29.15 | mscLpEE1StateTable | Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB |
| 1.3.6.1.4.1.562.36.2.1.12.29.15.1 | mscLpEE1StateEntry | Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB |
| 1.3.6.1.4.1.562.36.2.1.12.29.15.1.4 | mscLpEE1AvailabilityStatus | Nortel-MsCarrier-MscPassport-ExternalTimingE1MIB |