All MIBs › Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB › mscLpEDS1StandbyStatus
mscLpEDS1StandbyStatus
Module: Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB
OID (symbolic): Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB::mscLpEDS1StandbyStatus
OID (numeric): 1.3.6.1.4.1.562.36.2.1.12.28.15.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: If supported by the component, this attribute indicates the OSI Standby status of the component.
The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable.
The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity.
The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
What is mscLpEDS1StandbyStatus?
This object reports the OSI Standby Status of the EDS1 component when it serves as a backup timing source: hotStandby if immediately ready to take over without initialization, coldStandby if it would need initialization first, or providingService if it is currently backing up another resource. Admins check this to understand the redundancy readiness of a backup timing line before relying on it in a failover scenario. For example, an EDS1 component reporting coldStandby(1) means it would introduce a delay before becoming the active timing source if called upon.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.28.15.1.8 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB::mscLpEDS1StandbyStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.28.15.1.8.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB::mscLpEDS1StandbyStatus.1
Start monitoring Nortel MsCarrier MscPassport (Passport) carrier switch, CPeD Control Processor (external DS1 timing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB::mscLpEDS1StandbyStatus OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport (Passport) carrier switch, CPeD Control Processor (external DS1 timing) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.12 | mscLp | Nortel-MsCarrier-MscPassport-LogicalProcessorMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.28 | mscLpEDS1 | Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB |
| 1.3.6.1.4.1.562.36.2.1.12.28.15 | mscLpEDS1StateTable | Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB |
| 1.3.6.1.4.1.562.36.2.1.12.28.15.1 | mscLpEDS1StateEntry | Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB |
| 1.3.6.1.4.1.562.36.2.1.12.28.15.1.8 | mscLpEDS1StandbyStatus | Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB |