All MIBs › Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB › mscLpEDS1ControlStatus
mscLpEDS1ControlStatus
Module: Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB
OID (symbolic): Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB::mscLpEDS1ControlStatus
OID (numeric): 1.3.6.1.4.1.562.36.2.1.12.28.15.1.6
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present.
The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked.
The value suspended indicates that the service has been administratively suspended.
Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
What is mscLpEDS1ControlStatus?
This object is an OSI Control Status bitmap for the EDS1 component, flagging conditions such as subjectToTest, partOfServicesLocked, reservedForTest, or suspended that describe administrative or testing restrictions currently in effect. Admins check this to understand why a component behaves unusually or is unavailable even though its admin state appears unlocked. For example, the reservedForTest(2) bit being set explains why the component is administratively unavailable while undergoing a diagnostic test procedure.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.28.15.1.6 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB::mscLpEDS1ControlStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.28.15.1.6.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB::mscLpEDS1ControlStatus.1
Start monitoring Nortel MsCarrier MscPassport (Passport) carrier switch, CPeD Control Processor (external DS1 timing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB::mscLpEDS1ControlStatus OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport (Passport) carrier switch, CPeD Control Processor (external DS1 timing) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.12 | mscLp | Nortel-MsCarrier-MscPassport-LogicalProcessorMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.28 | mscLpEDS1 | Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB |
| 1.3.6.1.4.1.562.36.2.1.12.28.15 | mscLpEDS1StateTable | Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB |
| 1.3.6.1.4.1.562.36.2.1.12.28.15.1 | mscLpEDS1StateEntry | Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB |
| 1.3.6.1.4.1.562.36.2.1.12.28.15.1.6 | mscLpEDS1ControlStatus | Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB |