All MIBs › Nortel-MsCarrier-MscPassport-DprsMcsEpMIB › mscMcsMgrDprsMcsEpGEpLCoOverrideRemoteName
mscMcsMgrDprsMcsEpGEpLCoOverrideRemoteName
Module: Nortel-MsCarrier-MscPassport-DprsMcsEpMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-DprsMcsEpMIB::mscMcsMgrDprsMcsEpGEpLCoOverrideRemoteName
OID (numeric): 1.3.6.1.4.1.562.36.2.1.122.2.3.4.10.1.2
Node type: OBJECT-TYPE
Type: AsciiString
Access: read-write
Description: If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this attribute and then lock/unlock the service component which will result in this new overrideRemoteName being used as if it had been provisioned into the PLC remoteName. The advantage of this attribute is that the connection's remoteName can be changed immediately without having to 'activate prov' but the disadvantage is that the overrideRemoteName is not permanent and if the card or switch is reset the override will be lost.
What is mscMcsMgrDprsMcsEpGEpLCoOverrideRemoteName?
Read-write override remote name (0-40 chars) applied when the current PLC remoteName is blank; after setting it, lock/unlock the service component to have it take effect immediately as if provisioned. This override is not permanent and is lost on a card or switch reset, unlike a properly provisioned remoteName.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.122.2.3.4.10.1.2 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DprsMcsEpMIB::mscMcsMgrDprsMcsEpGEpLCoOverrideRemoteName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.122.2.3.4.10.1.2.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DprsMcsEpMIB::mscMcsMgrDprsMcsEpGEpLCoOverrideRemoteName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.122.2.3.4.10.1.2.1 s <value>
Start monitoring Nortel MsCarrier MscPassport WAN switch (DPRS MCS endpoint groups) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DprsMcsEpMIB::mscMcsMgrDprsMcsEpGEpLCoOverrideRemoteName OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport WAN switch (DPRS MCS endpoint groups) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.122 | mscMcsMgr | Nortel-MsCarrier-MscPassport-McsMgrMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.122.2 | mscMcsMgrDprsMcsEpG | Nortel-MsCarrier-MscPassport-DprsMcsEpMIB |
| 1.3.6.1.4.1.562.36.2.1.122.2.3 | mscMcsMgrDprsMcsEpGEp | Nortel-MsCarrier-MscPassport-DprsMcsEpMIB |
| 1.3.6.1.4.1.562.36.2.1.122.2.3.4 | mscMcsMgrDprsMcsEpGEpLCo | Nortel-MsCarrier-MscPassport-DprsMcsEpMIB |
| 1.3.6.1.4.1.562.36.2.1.122.2.3.4.10 | mscMcsMgrDprsMcsEpGEpLCoPathDataTable | Nortel-MsCarrier-MscPassport-DprsMcsEpMIB |
| 1.3.6.1.4.1.562.36.2.1.122.2.3.4.10.1 | mscMcsMgrDprsMcsEpGEpLCoPathDataEntry | Nortel-MsCarrier-MscPassport-DprsMcsEpMIB |
| 1.3.6.1.4.1.562.36.2.1.122.2.3.4.10.1.2 | mscMcsMgrDprsMcsEpGEpLCoOverrideRemoteName | Nortel-MsCarrier-MscPassport-DprsMcsEpMIB |