Nortel-MsCarrier-MscPassport-DprsMcsEpMIB :: mscMcsMgrDprsMcsEpGEpLCoBumpPreference

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-DprsMcsEpMIB › mscMcsMgrDprsMcsEpGEpLCoBumpPreference

mscMcsMgrDprsMcsEpGEpLCoBumpPreference

Module: Nortel-MsCarrier-MscPassport-DprsMcsEpMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-DprsMcsEpMIB::mscMcsMgrDprsMcsEpGEpLCoBumpPreference

OID (numeric): 1.3.6.1.4.1.562.36.2.1.122.2.3.4.10.1.23

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute specifies when bumping will occur during route selection process. Bumping may occur when necessary or always. It will be necessary for a connection to bump if there is not enough resources for the connection to be established and these resources are occupied by a connection whose setupPriority is lower (numerically higher) than the connection's setupPriority. A connection may also always bump in order to obtain the best route.

What is mscMcsMgrDprsMcsEpGEpLCoBumpPreference?

Read-only setting for when this connection is allowed to bump lower-priority connections during route selection: bumpWhenNecessary(0) only when required to obtain resources, or bumpToObtainBestRoute(1) whenever doing so yields a better route. The latter can churn other lower-priority paths more often in exchange for this path getting an optimal route.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.122.2.3.4.10.1.23
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DprsMcsEpMIB::mscMcsMgrDprsMcsEpGEpLCoBumpPreference

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.122.2.3.4.10.1.23.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DprsMcsEpMIB::mscMcsMgrDprsMcsEpGEpLCoBumpPreference.1

Start monitoring Nortel MsCarrier MscPassport WAN switch (DPRS MCS endpoint groups) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DprsMcsEpMIB::mscMcsMgrDprsMcsEpGEpLCoBumpPreference OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport WAN switch (DPRS MCS endpoint groups) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.122mscMcsMgrNortel-MsCarrier-MscPassport-McsMgrMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.122.2mscMcsMgrDprsMcsEpGNortel-MsCarrier-MscPassport-DprsMcsEpMIB
1.3.6.1.4.1.562.36.2.1.122.2.3mscMcsMgrDprsMcsEpGEpNortel-MsCarrier-MscPassport-DprsMcsEpMIB
1.3.6.1.4.1.562.36.2.1.122.2.3.4mscMcsMgrDprsMcsEpGEpLCoNortel-MsCarrier-MscPassport-DprsMcsEpMIB
1.3.6.1.4.1.562.36.2.1.122.2.3.4.10mscMcsMgrDprsMcsEpGEpLCoPathDataTableNortel-MsCarrier-MscPassport-DprsMcsEpMIB
1.3.6.1.4.1.562.36.2.1.122.2.3.4.10.1mscMcsMgrDprsMcsEpGEpLCoPathDataEntryNortel-MsCarrier-MscPassport-DprsMcsEpMIB
1.3.6.1.4.1.562.36.2.1.122.2.3.4.10.1.23mscMcsMgrDprsMcsEpGEpLCoBumpPreferenceNortel-MsCarrier-MscPassport-DprsMcsEpMIB