Nortel-MsCarrier-MscPassport-DprsMcsEpMIB :: mscMcsMgrDprsMcsEpGEpEpDConnectionTransferPriority

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-DprsMcsEpMIB › mscMcsMgrDprsMcsEpGEpEpDConnectionTransferPriority

mscMcsMgrDprsMcsEpGEpEpDConnectionTransferPriority

Module: Nortel-MsCarrier-MscPassport-DprsMcsEpMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-DprsMcsEpMIB::mscMcsMgrDprsMcsEpGEpEpDConnectionTransferPriority

OID (numeric): 1.3.6.1.4.1.562.36.2.1.122.2.3.2.10.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the transfer priority used to establish the transport connection. It references the ModuleData Frs AtmNet Tpm to determine the ATM service category to be used by the transport connection. This attribute is used by the Ep solely for the purpose of determining the service category that should be used to establish the transport connection.

What is mscMcsMgrDprsMcsEpGEpEpDConnectionTransferPriority?

Read-write value (0-15) specifying the transfer priority used to establish the transport connection, referencing the module's Frs AtmNet Tpm table to determine the ATM service category. This value is used only to pick the service category for setup, not for anything else operationally.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.122.2.3.2.10.1.2
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DprsMcsEpMIB::mscMcsMgrDprsMcsEpGEpEpDConnectionTransferPriority

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.122.2.3.2.10.1.2.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DprsMcsEpMIB::mscMcsMgrDprsMcsEpGEpEpDConnectionTransferPriority.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.122.2.3.2.10.1.2.1 i <value>

Start monitoring Nortel MsCarrier MscPassport WAN switch (DPRS MCS endpoint groups) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DprsMcsEpMIB::mscMcsMgrDprsMcsEpGEpEpDConnectionTransferPriority OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport WAN switch (DPRS MCS endpoint groups) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.122mscMcsMgrNortel-MsCarrier-MscPassport-McsMgrMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.122.2mscMcsMgrDprsMcsEpGNortel-MsCarrier-MscPassport-DprsMcsEpMIB
1.3.6.1.4.1.562.36.2.1.122.2.3mscMcsMgrDprsMcsEpGEpNortel-MsCarrier-MscPassport-DprsMcsEpMIB
1.3.6.1.4.1.562.36.2.1.122.2.3.2mscMcsMgrDprsMcsEpGEpEpDNortel-MsCarrier-MscPassport-DprsMcsEpMIB
1.3.6.1.4.1.562.36.2.1.122.2.3.2.10mscMcsMgrDprsMcsEpGEpEpDProvTableNortel-MsCarrier-MscPassport-DprsMcsEpMIB
1.3.6.1.4.1.562.36.2.1.122.2.3.2.10.1mscMcsMgrDprsMcsEpGEpEpDProvEntryNortel-MsCarrier-MscPassport-DprsMcsEpMIB
1.3.6.1.4.1.562.36.2.1.122.2.3.2.10.1.2mscMcsMgrDprsMcsEpGEpEpDConnectionTransferPriorityNortel-MsCarrier-MscPassport-DprsMcsEpMIB