Nortel-MsCarrier-MscPassport-DprsMcsEpMIB :: mscMcsMgrDprsMcsEpGEpAlarmStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-DprsMcsEpMIB › mscMcsMgrDprsMcsEpGEpAlarmStatus

mscMcsMgrDprsMcsEpGEpAlarmStatus

Module: Nortel-MsCarrier-MscPassport-DprsMcsEpMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-DprsMcsEpMIB::mscMcsMgrDprsMcsEpGEpAlarmStatus

OID (numeric): 1.3.6.1.4.1.562.36.2.1.122.2.3.10.1.7

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user.

When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present.

The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled.

The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.

The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.

The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.

The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component.

Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)

What is mscMcsMgrDprsMcsEpGEpAlarmStatus?

Read-only 1-byte bitmask of OSI Alarm status qualifiers (underRepair, critical, major, minor, alarmOutstanding) for this EndPoint, empty if none apply. This is the quickest field to check for whether the endpoint currently has an outstanding fault condition and at what severity.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.122.2.3.10.1.7
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DprsMcsEpMIB::mscMcsMgrDprsMcsEpGEpAlarmStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.122.2.3.10.1.7.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DprsMcsEpMIB::mscMcsMgrDprsMcsEpGEpAlarmStatus.1

Start monitoring Nortel MsCarrier MscPassport WAN switch (DPRS MCS endpoint groups) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DprsMcsEpMIB::mscMcsMgrDprsMcsEpGEpAlarmStatus OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport WAN switch (DPRS MCS endpoint groups) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.122mscMcsMgrNortel-MsCarrier-MscPassport-McsMgrMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.122.2mscMcsMgrDprsMcsEpGNortel-MsCarrier-MscPassport-DprsMcsEpMIB
1.3.6.1.4.1.562.36.2.1.122.2.3mscMcsMgrDprsMcsEpGEpNortel-MsCarrier-MscPassport-DprsMcsEpMIB
1.3.6.1.4.1.562.36.2.1.122.2.3.10mscMcsMgrDprsMcsEpGEpStateTableNortel-MsCarrier-MscPassport-DprsMcsEpMIB
1.3.6.1.4.1.562.36.2.1.122.2.3.10.1mscMcsMgrDprsMcsEpGEpStateEntryNortel-MsCarrier-MscPassport-DprsMcsEpMIB
1.3.6.1.4.1.562.36.2.1.122.2.3.10.1.7mscMcsMgrDprsMcsEpGEpAlarmStatusNortel-MsCarrier-MscPassport-DprsMcsEpMIB