Nortel-MsCarrier-MscPassport-DpnTrunksMIB :: mscDpnGateRemoteValidationAction

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-MsCarrier-MscPassport-DpnTrunksMIBmscDpnGateRemoteValidationAction

mscDpnGateRemoteValidationAction

Module: Nortel-MsCarrier-MscPassport-DpnTrunksMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-DpnTrunksMIB::mscDpnGateRemoteValidationAction

OID (numeric): 1.3.6.1.4.1.562.36.2.1.61.101.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies the action to be taken if there is a mismatch between the provisioned value and the value received from the remote end, in cases where the expectedRemoteNamsId is non-zero. If this attribute is provisioned to continue then upon an unsucessful validation staging continues, otherwise, if disable is set then the DpnGateway does not continue to stage but, attempts to stage again after a one minute time out. All unsuccessful validation when expectedRemoteNamsId has been set result in the generation of an alarm.

What is mscDpnGateRemoteValidationAction?

Chooses what happens when the remote Nams Identifier doesn't match mscDpnGateExpectedRemoteNamsId: continue lets staging proceed anyway, while disable stops staging and retries after a one-minute timeout; either mismatch raises an alarm.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.61.101.1.2
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DpnTrunksMIB::mscDpnGateRemoteValidationAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.61.101.1.2.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DpnTrunksMIB::mscDpnGateRemoteValidationAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.61.101.1.2.1 i <value>

Start monitoring Nortel MsCarrier MscPassport WAN switch (DPN gateway trunk interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DpnTrunksMIB::mscDpnGateRemoteValidationAction OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport WAN switch (DPN gateway trunk interfaces) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.61mscDpnGateNortel-MsCarrier-MscPassport-DpnTrunksMIB
1.3.6.1.4.1.562.36.2.1.61.101mscDpnGateProvTableNortel-MsCarrier-MscPassport-DpnTrunksMIB
1.3.6.1.4.1.562.36.2.1.61.101.1mscDpnGateProvEntryNortel-MsCarrier-MscPassport-DpnTrunksMIB
1.3.6.1.4.1.562.36.2.1.61.101.1.2mscDpnGateRemoteValidationActionNortel-MsCarrier-MscPassport-DpnTrunksMIB