All MIBs › Nortel-MsCarrier-MscPassport-DpnTrunksMIB › mscDpnGateAlarmStatus
mscDpnGateAlarmStatus
Module: Nortel-MsCarrier-MscPassport-DpnTrunksMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-DpnTrunksMIB::mscDpnGateAlarmStatus
OID (numeric): 1.3.6.1.4.1.562.36.2.1.61.103.1.7
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present.
The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component.
Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
What is mscDpnGateAlarmStatus?
Reports the highest-severity outstanding alarm category on the DpnGateway, as a bitmask covering underRepair, critical, major, minor, or the generic alarmOutstanding flag, giving an admin a fast triage signal from this single object.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.61.103.1.7 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DpnTrunksMIB::mscDpnGateAlarmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.61.103.1.7.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DpnTrunksMIB::mscDpnGateAlarmStatus.1
Start monitoring Nortel MsCarrier MscPassport WAN switch (DPN gateway trunk interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DpnTrunksMIB::mscDpnGateAlarmStatus OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport WAN switch (DPN gateway trunk interfaces) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.61 | mscDpnGate | Nortel-MsCarrier-MscPassport-DpnTrunksMIB |
| 1.3.6.1.4.1.562.36.2.1.61.103 | mscDpnGateStateTable | Nortel-MsCarrier-MscPassport-DpnTrunksMIB |
| 1.3.6.1.4.1.562.36.2.1.61.103.1 | mscDpnGateStateEntry | Nortel-MsCarrier-MscPassport-DpnTrunksMIB |
| 1.3.6.1.4.1.562.36.2.1.61.103.1.7 | mscDpnGateAlarmStatus | Nortel-MsCarrier-MscPassport-DpnTrunksMIB |