Nortel-MsCarrier-MscPassport-DpnTrunksMIB :: mscDpnGateActivateReason

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-MsCarrier-MscPassport-DpnTrunksMIBmscDpnGateActivateReason

mscDpnGateActivateReason

Module: Nortel-MsCarrier-MscPassport-DpnTrunksMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-DpnTrunksMIB::mscDpnGateActivateReason

OID (numeric): 1.3.6.1.4.1.562.36.2.1.61.105.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute indicates the reason the DpnGateway has been activated by the remote end. The value corresponds to the link type of the DPN end. It is always unknown until the link comes into service. If this attribute is set to dedicated, the DPN is a dedicated network link. If this attribute is set to dnl, the DPN end is a dial network link, meaning a network link which is connected through a dial-up service. If this attribute is set to dbnl, the DPN end is dial backup network link, activated because the main network link is out of service. If this attribute is set to bwod, the DPN end is a bandwidth on demand link, activated because extra bandwidth is required. If the attribute is set to unknown, the link is either not currently in use, or the DPN end has an unrecognized link type.

What is mscDpnGateActivateReason?

Reports why the remote end activated this DpnGateway link: dedicated for a fixed network link, dnl for a dial-up network link, dbnl for a dial backup activated after the main link failed, bwod for extra bandwidth-on-demand capacity, or unknown before the link comes into service.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.61.105.1.4
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DpnTrunksMIB::mscDpnGateActivateReason

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.61.105.1.4.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DpnTrunksMIB::mscDpnGateActivateReason.1

Start monitoring Nortel MsCarrier MscPassport WAN switch (DPN gateway trunk interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DpnTrunksMIB::mscDpnGateActivateReason OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport WAN switch (DPN gateway trunk interfaces) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.61mscDpnGateNortel-MsCarrier-MscPassport-DpnTrunksMIB
1.3.6.1.4.1.562.36.2.1.61.105mscDpnGateOperTableNortel-MsCarrier-MscPassport-DpnTrunksMIB
1.3.6.1.4.1.562.36.2.1.61.105.1mscDpnGateOperEntryNortel-MsCarrier-MscPassport-DpnTrunksMIB
1.3.6.1.4.1.562.36.2.1.61.105.1.4mscDpnGateActivateReasonNortel-MsCarrier-MscPassport-DpnTrunksMIB