Nortel-MsCarrier-MscPassport-DcmeMIB :: mscDcmeUnrestricted64kAlarmThreshold

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-DcmeMIB › mscDcmeUnrestricted64kAlarmThreshold

mscDcmeUnrestricted64kAlarmThreshold

Module: Nortel-MsCarrier-MscPassport-DcmeMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeUnrestricted64kAlarmThreshold

OID (numeric): 1.3.6.1.4.1.562.36.2.1.129.10.1.7

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies how many unrestricted 64 kbit/s calls can be rejected by one dcmeLink within the alarmTimeInterval time before a SET alarm is generated. This alarm is cleared when the number of rejected unrestricted 64 kbit/s calls is less than unrestricted64kAlarmThreshold in a subsequent interval. If the value is 0 the rejected unrestricted 64 kbit/s calls are not monitored.

What is mscDcmeUnrestricted64kAlarmThreshold?

The number of unrestricted 64 kbit/s calls that can be rejected by one DcmeLink within mscDcmeAlarmTimeInterval before a SET alarm is raised (0 disables this monitoring, the default). Lets an admin alarm specifically on rejected 64kbit/s data calls, distinct from speech or 3.1kHz audio rejections.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.129.10.1.7
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeUnrestricted64kAlarmThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.129.10.1.7.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeUnrestricted64kAlarmThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.129.10.1.7.1 i <value>

Start monitoring Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeUnrestricted64kAlarmThreshold OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.129mscDcmeNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.129.10mscDcmeProvTableNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.129.10.1mscDcmeProvEntryNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.129.10.1.7mscDcmeUnrestricted64kAlarmThresholdNortel-MsCarrier-MscPassport-DcmeMIB