All MIBs › Nortel-MsCarrier-MscPassport-DcmeMIB › mscDcmeProfileSilenceSuppressionFactor
mscDcmeProfileSilenceSuppressionFactor
Module: Nortel-MsCarrier-MscPassport-DcmeMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileSilenceSuppressionFactor
OID (numeric): 1.3.6.1.4.1.562.36.2.1.129.2.11.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the expected savings (percent reduction) in required bandwidth if silence suppression is used. If silence suppression is used, the bandwidth required for the connection will be lower than if silence suppression is not used. However, the routing system will not be aware of the unused bandwidth unless that bandwidth is specified by this attribute. If the value specified for the expected savings is too low, then some bandwidth made available by the use of silence suppression will be wasted. If the value specified for the expected savings is too high, then some connections may fail to set up because the routing system will over-calculate the amount of bandwidth available. The effectiveness of silence suppression can be influenced by language related speech patterns.
What is mscDcmeProfileSilenceSuppressionFactor?
The expected bandwidth savings (0-60%, default 40) from silence suppression, used by the routing system to calculate available capacity. Setting this too low wastes bandwidth the system doesn't know is free; setting it too high risks connection setup failures from over-optimistic capacity estimates, so admins tune it based on observed call patterns.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.129.2.11.1.6 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileSilenceSuppressionFactor
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.129.2.11.1.6.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileSilenceSuppressionFactor.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.129.2.11.1.6.1 i <value>
Start monitoring Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileSilenceSuppressionFactor OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.129 | mscDcme | Nortel-MsCarrier-MscPassport-DcmeMIB |
| 1.3.6.1.4.1.562.36.2.1.129.2 | mscDcmeProfile | Nortel-MsCarrier-MscPassport-DcmeMIB |
| 1.3.6.1.4.1.562.36.2.1.129.2.11 | mscDcmeProfileFrOpsTable | Nortel-MsCarrier-MscPassport-DcmeMIB |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1 | mscDcmeProfileFrOpsEntry | Nortel-MsCarrier-MscPassport-DcmeMIB |
| 1.3.6.1.4.1.562.36.2.1.129.2.11.1.6 | mscDcmeProfileSilenceSuppressionFactor | Nortel-MsCarrier-MscPassport-DcmeMIB |