All MIBs › Nortel-MsCarrier-MscPassport-DcmeMIB › mscDcmeProfileSetupPriority
mscDcmeProfileSetupPriority
Module: Nortel-MsCarrier-MscPassport-DcmeMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileSetupPriority
OID (numeric): 1.3.6.1.4.1.562.36.2.1.129.2.10.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the priority at which a path is established. Zero is the highest priority and four is the lowest. When PORS establishes a path through the network, it uses the setupPriority attribute to determine its potential for bumping established paths to acquire their bandwidth. The holdingPriority, a complementary attribute of this attribute, indicates the priority a path maintains once it is established. A new path can bump an existing path if the new path's setupPriority is higher (numerically less) than the existing path's holdingPriority.
What is mscDcmeProfileSetupPriority?
The priority (0=highest, 4=lowest, default 2) at which the routing system (PORS) establishes a path for this profile, determining its ability to bump lower-priority established paths for bandwidth. Admins raise the priority (lower the number) for profiles carrying critical traffic that should win contention for bandwidth over less important calls.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.129.2.10.1.1 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileSetupPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.129.2.10.1.1.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileSetupPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.129.2.10.1.1.1 i <value>
Start monitoring Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileSetupPriority OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.129 | mscDcme | Nortel-MsCarrier-MscPassport-DcmeMIB |
| 1.3.6.1.4.1.562.36.2.1.129.2 | mscDcmeProfile | Nortel-MsCarrier-MscPassport-DcmeMIB |
| 1.3.6.1.4.1.562.36.2.1.129.2.10 | mscDcmeProfileLCOpsTable | Nortel-MsCarrier-MscPassport-DcmeMIB |
| 1.3.6.1.4.1.562.36.2.1.129.2.10.1 | mscDcmeProfileLCOpsEntry | Nortel-MsCarrier-MscPassport-DcmeMIB |
| 1.3.6.1.4.1.562.36.2.1.129.2.10.1.1 | mscDcmeProfileSetupPriority | Nortel-MsCarrier-MscPassport-DcmeMIB |