Nortel-MsCarrier-MscPassport-DcmeMIB :: mscDcmeProfilePermittedTrunkTypes

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-DcmeMIB › mscDcmeProfilePermittedTrunkTypes

mscDcmeProfilePermittedTrunkTypes

Module: Nortel-MsCarrier-MscPassport-DcmeMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfilePermittedTrunkTypes

OID (numeric): 1.3.6.1.4.1.562.36.2.1.129.2.10.1.5

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: This attribute specifies up to eight types of trunks that can be used on the route. The terrestrial and satellite trunk types are defined, leaving six remaining arbitrary types that can be defined by the network administration. The trunk's type is indicated in the trunkType attribute of the Trunk component. When selecting a route, PORS chooses only trunks whose trunkTypes are in the permittedTrunkTypes for the path.

Description of bits: terrestrial(0) satellite(1) trunkType1(2) trunkType2(3) trunkType3(4) trunkType4(5) trunkType5(6) trunkType6(7)

What is mscDcmeProfilePermittedTrunkTypes?

A bitmask (default 'f8'H) selecting which of up to eight trunk types (terrestrial, satellite, and six network-defined types) are eligible for routes under this profile. Admins use this to, for example, exclude satellite trunks (with their higher latency) from a delay-sensitive profile by clearing that bit.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.129.2.10.1.5
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfilePermittedTrunkTypes

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.129.2.10.1.5.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfilePermittedTrunkTypes.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.129.2.10.1.5.1 s <value>

Start monitoring Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfilePermittedTrunkTypes OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.129mscDcmeNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.129.2mscDcmeProfileNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.129.2.10mscDcmeProfileLCOpsTableNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.129.2.10.1mscDcmeProfileLCOpsEntryNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.129.2.10.1.5mscDcmeProfilePermittedTrunkTypesNortel-MsCarrier-MscPassport-DcmeMIB