Nortel-MsCarrier-MscPassport-DcmeMIB :: mscDcmeProfileMaxModemFaxG711G726Rate

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-DcmeMIB › mscDcmeProfileMaxModemFaxG711G726Rate

mscDcmeProfileMaxModemFaxG711G726Rate

Module: Nortel-MsCarrier-MscPassport-DcmeMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileMaxModemFaxG711G726Rate

OID (numeric): 1.3.6.1.4.1.562.36.2.1.129.2.11.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies the maximum possible bit rate (minimum possible compression rate) during a modem call on this channel. It also specifies the maximum possible bit rate (minimum possible compression rate) during a fax call on this channel, but only if faxEncoding is g711G726. maxModemFaxG711G726Rate always applies to modem traffic, and never applies to voice traffic. If faxEncoding is g711G726, maxModemFaxG711G726Rate also applies to fax traffic. If faxEncoding is faxRelay, maxModemFaxG711G726Rate does not apply to fax traffic. Rates can change during a call due to congestion in the network.

What is mscDcmeProfileMaxModemFaxG711G726Rate?

The maximum bit rate (n64(0, the default) or n32(1)) for modem traffic, and for fax traffic too when mscDcmeProfileModemFaxEncoding is g711G726, on this profile. Admins lower this to n32 to conserve bandwidth for modem/fax calls at the cost of more aggressive compression.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.129.2.11.1.10
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileMaxModemFaxG711G726Rate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.129.2.11.1.10.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileMaxModemFaxG711G726Rate.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.129.2.11.1.10.1 i <value>

Start monitoring Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileMaxModemFaxG711G726Rate OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.129mscDcmeNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.129.2mscDcmeProfileNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.129.2.11mscDcmeProfileFrOpsTableNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.129.2.11.1mscDcmeProfileFrOpsEntryNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.129.2.11.1.10mscDcmeProfileMaxModemFaxG711G726RateNortel-MsCarrier-MscPassport-DcmeMIB