Nortel-MsCarrier-MscPassport-DcmeMIB :: mscDcmeProfileEgressAudioGain

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-DcmeMIB › mscDcmeProfileEgressAudioGain

mscDcmeProfileEgressAudioGain

Module: Nortel-MsCarrier-MscPassport-DcmeMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileEgressAudioGain

OID (numeric): 1.3.6.1.4.1.562.36.2.1.129.2.11.1.15

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies the gain in dB that is applied to data leaving the network on this route. It applies to voice, modem and fax traffic. For example, egress gain is applied to audio data going to a PBX. If egressAudioGain is negative, a loss is applied.

ingressAudioGain and egressAudioGain are used in loss planning, which is the configuration of the devices in the network to ensure that the signal level from any point in the network to any other point is correct.

What is mscDcmeProfileEgressAudioGain?

The gain in dB (-12 to 12, default 0) applied to audio leaving the network on this route (e.g. toward a PBX) under this profile, with negative values applying a loss. Used together with mscDcmeProfileIngressAudioGain for loss planning, to correct audio levels perceived at the far end.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.129.2.11.1.15
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileEgressAudioGain

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.129.2.11.1.15.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileEgressAudioGain.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.129.2.11.1.15.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mscDcmeProfileEgressAudioGain.1

Start monitoring Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileEgressAudioGain OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.129mscDcmeNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.129.2mscDcmeProfileNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.129.2.11mscDcmeProfileFrOpsTableNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.129.2.11.1mscDcmeProfileFrOpsEntryNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.129.2.11.1.15mscDcmeProfileEgressAudioGainNortel-MsCarrier-MscPassport-DcmeMIB