All MIBs › Nortel-MsCarrier-MscPassport-DcmeMIB › mscDcmeProfileBumpPreference
mscDcmeProfileBumpPreference
Module: Nortel-MsCarrier-MscPassport-DcmeMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileBumpPreference
OID (numeric): 1.3.6.1.4.1.562.36.2.1.129.2.10.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies when bumping occurs in the route selection process. A connection with higher (numerically less) setupPriority may bump a connection with lower (numerically higher) setupPriority in order to acquire its bandwidth and be established. If bumpPreference is bumpWhenNecessary, bumping occurs only when it is necessary. That is, a connection will bump another connection only if there is no other way for the connection to be established. If bumpPreference is bumpToObtainBestRoute, bumping occurs in order to use the best available route it may have.
What is mscDcmeProfileBumpPreference?
Controls when a higher-priority connection is allowed to bump a lower-priority one for bandwidth: bumpWhenNecessary(0, the default) only bumps when there's no other way to establish the connection, while bumpToObtainBestRoute(1) bumps to secure the best available route even if a worse route was available without bumping. Admins choose bumpToObtainBestRoute when route quality matters more than avoiding disruption to lower-priority calls.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.129.2.10.1.3 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileBumpPreference
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.129.2.10.1.3.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileBumpPreference.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.129.2.10.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mscDcmeProfileBumpPreference.1
Start monitoring Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DcmeMIB::mscDcmeProfileBumpPreference OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.129 | mscDcme | Nortel-MsCarrier-MscPassport-DcmeMIB |
| 1.3.6.1.4.1.562.36.2.1.129.2 | mscDcmeProfile | Nortel-MsCarrier-MscPassport-DcmeMIB |
| 1.3.6.1.4.1.562.36.2.1.129.2.10 | mscDcmeProfileLCOpsTable | Nortel-MsCarrier-MscPassport-DcmeMIB |
| 1.3.6.1.4.1.562.36.2.1.129.2.10.1 | mscDcmeProfileLCOpsEntry | Nortel-MsCarrier-MscPassport-DcmeMIB |
| 1.3.6.1.4.1.562.36.2.1.129.2.10.1.3 | mscDcmeProfileBumpPreference | Nortel-MsCarrier-MscPassport-DcmeMIB |