Nortel-MsCarrier-MscPassport-DcmeMIB :: mscDclTransmittedTrmSignal

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-DcmeMIB › mscDclTransmittedTrmSignal

mscDclTransmittedTrmSignal

Module: Nortel-MsCarrier-MscPassport-DcmeMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-DcmeMIB::mscDclTransmittedTrmSignal

OID (numeric): 1.3.6.1.4.1.562.36.2.1.130.12.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute indicates the last TRM signal transmitted to the ISC. The transmitted TRM signal can be one of: Dcme normal (100): , this signal is allways transmitted by the DCME when there is no other signal to be sent, No 64 kbit/s capacity (101): this signal is transmitted by the DCME when it is not able to handle new 64 kbit/s call requests, Maintenance release request(110): this signal is transmitted by the DCME when the DCME is to be removed from the service for maintenance, No capacity available (111) this signal is transmitted by the DCME when there is bearer capacity available to set up new 3.1 kHz audio or speech calls,

What is mscDclTransmittedTrmSignal?

The last TRM signalling code the DCME sent to the ISC on this link: dcmeNormal100(4) is the routine idle signal, no64KbitSCapacity101(5) reports it can't handle new 64kbit/s call requests, maintenanceReleaseRequest110(6) asks to be pulled from service for maintenance, and noCapacityAvailable111(7) reports it has capacity for new 3.1kHz/speech calls. Admins read this to understand what capacity/maintenance state the DCME is currently signalling to the switch.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.130.12.1.5
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDclTransmittedTrmSignal

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.130.12.1.5.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDclTransmittedTrmSignal.1

Start monitoring Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DcmeMIB::mscDclTransmittedTrmSignal OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.130mscDclNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.130.12mscDclOperTableNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.130.12.1mscDclOperEntryNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.130.12.1.5mscDclTransmittedTrmSignalNortel-MsCarrier-MscPassport-DcmeMIB