Nortel-MsCarrier-MscPassport-DcmeMIB :: mscDclReceivedTrmSignal

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-DcmeMIB › mscDclReceivedTrmSignal

mscDclReceivedTrmSignal

Module: Nortel-MsCarrier-MscPassport-DcmeMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-DcmeMIB::mscDclReceivedTrmSignal

OID (numeric): 1.3.6.1.4.1.562.36.2.1.130.12.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute indicates the last TRM signal received from the ISC. The received TRM signal can be one of: Invalid (xxx): this signal should never be received, Switching Centre normal (101): this signal is allways transmitted by the ISC when there is no other signal to be sent, Maintenance release ack(110): this signal is transmitted by the ISC if it accepts the maintenance release request, Dcme clear of traffic: this signal is transmitted by the ISC if it has accepted the maintenance release request signal and now informs the DCME when all circuits are idle,

What is mscDclReceivedTrmSignal?

The last TRM signalling code received from the ISC on this link: switchingCentreNormal101(5) is the routine idle signal, maintenanceReleaseAck110(6) confirms the ISC accepted a maintenance release request, dcmeClearOfTraffic111(7) tells the DCME all circuits are now idle for maintenance, and the invalid(1-4) codes should never legitimately occur. Admins seeing an invalid code here suspect an ISC provisioning error or transmission fault (also tracked by mscDclInvalidTrmSignals).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.130.12.1.4
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDclReceivedTrmSignal

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.130.12.1.4.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDclReceivedTrmSignal.1

Start monitoring Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DcmeMIB::mscDclReceivedTrmSignal OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.130mscDclNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.130.12mscDclOperTableNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.130.12.1mscDclOperEntryNortel-MsCarrier-MscPassport-DcmeMIB
1.3.6.1.4.1.562.36.2.1.130.12.1.4mscDclReceivedTrmSignalNortel-MsCarrier-MscPassport-DcmeMIB