All MIBs › Nortel-MsCarrier-MscPassport-DcmeMIB › mscDclIdlePattern
mscDclIdlePattern
Module: Nortel-MsCarrier-MscPassport-DcmeMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-DcmeMIB::mscDclIdlePattern
OID (numeric): 1.3.6.1.4.1.562.36.2.1.130.10.1.5
Node type: OBJECT-TYPE
Type: Hex
Access: read-write
Description: This attribute specifies an idlePattern in the channel received from the E1 interface, which is required to determine if the channel is active or not. When the end of the idlePattern is detected it indicates the start of a new speech call. When this idlePattern is detected it indicates the end of a speech call. When changing this attribute make sure that the alternateIdlePattern attibute is set correctly.
What is mscDclIdlePattern?
A hex idle-pattern byte (0-255, default 213/0xD5) detected on the E1 channel that marks the boundary between an idle channel and an active speech call; the end of this pattern signals a new call starting, and its detection again signals the call ending. Admins change this only in coordination with mscDclAlternateIdlePattern, since setting it incorrectly can cause the DCME to misdetect call start/end on the link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.130.10.1.5 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDclIdlePattern
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.130.10.1.5.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-DcmeMIB::mscDclIdlePattern.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.130.10.1.5.1 s <value>
Start monitoring Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-DcmeMIB::mscDclIdlePattern OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport mobile carrier switch (DCME voice compression trunk) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.130 | mscDcl | Nortel-MsCarrier-MscPassport-DcmeMIB |
| 1.3.6.1.4.1.562.36.2.1.130.10 | mscDclProvTable | Nortel-MsCarrier-MscPassport-DcmeMIB |
| 1.3.6.1.4.1.562.36.2.1.130.10.1 | mscDclProvEntry | Nortel-MsCarrier-MscPassport-DcmeMIB |
| 1.3.6.1.4.1.562.36.2.1.130.10.1.5 | mscDclIdlePattern | Nortel-MsCarrier-MscPassport-DcmeMIB |