Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB :: mscMmTxIdleSuppression

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB › mscMmTxIdleSuppression

mscMmTxIdleSuppression

Module: Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscMmTxIdleSuppression

OID (numeric): 1.3.6.1.4.1.562.36.2.1.151.11.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: idleSuppression controls the suppression of idle cells. An idle cell is one in which the bytes of the ATM payload (up to the partialFill level) match the idlePattern.

If idleSuppression is off, idle cells are not suppressed.

If idleSuppression is on, at least 75% of cells are suppressed under idle conditions.

The idleSuppression attribute in the receiving Aal1Ces component must have the same value as this attribute

The default and only value is off.

What is mscMmTxIdleSuppression?

Controls suppression of idle-pattern cells for this monitoring stream; off (the only supported value here) means idle cells are always sent, and the receiving Aal1Ces component's idleSuppression must match it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.151.11.1.7
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscMmTxIdleSuppression

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.151.11.1.7.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscMmTxIdleSuppression.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.151.11.1.7.1 i <value>

Start monitoring Nortel MsCarrier MscPassport ATM switch (AAL1 Circuit Emulation Service) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscMmTxIdleSuppression OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport ATM switch (AAL1 Circuit Emulation Service) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.151mscMmTxNortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
1.3.6.1.4.1.562.36.2.1.151.11mscMmTxProvTableNortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
1.3.6.1.4.1.562.36.2.1.151.11.1mscMmTxProvEntryNortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
1.3.6.1.4.1.562.36.2.1.151.11.1.7mscMmTxIdleSuppressionNortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB