All MIBs › Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB › mscAal1CesPepSvcStatus
mscAal1CesPepSvcStatus
Module: Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesPepSvcStatus
OID (numeric): 1.3.6.1.4.1.562.36.2.1.119.4.12.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: svcStatus indicates the status of the incoming connection.
When this attribute has the value initialising, it indicates that the component is initialising when first created; a connection has not been established, and no incoming setup requests will be processed.
When this attribute has the value connecting, it indicates that a connection has not yet been establised, but that incoming setup requests will be processed.
When this attribute has the value connected, it indicates that a connection has been established.
When this attribute has the value idle, it indicates that a connection has not been established, and that no incoming setup requests will be processed.
When this attribute has the value failed, it indicates that the connections is in a state other than those described above.
What is mscAal1CesPepSvcStatus?
Tracks the state of this passive end point's incoming connection: initialising just after creation, connecting once it will accept incoming setups, connected once a call is up, idle when down and not accepting setups, or failed for anything else. Unlike the Aep variant, this end point only ever receives calls, so there is no retriesExhausted state here.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.119.4.12.1.1 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesPepSvcStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.119.4.12.1.1.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesPepSvcStatus.1
Start monitoring Nortel MsCarrier MscPassport ATM switch (AAL1 Circuit Emulation Service) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesPepSvcStatus OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport ATM switch (AAL1 Circuit Emulation Service) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.119 | mscAal1Ces | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.119.4 | mscAal1CesPep | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.119.4.12 | mscAal1CesPepPassiveOperTable | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.119.4.12.1 | mscAal1CesPepPassiveOperEntry | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.119.4.12.1.1 | mscAal1CesPepSvcStatus | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |