All MIBs › Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB › mscAal1CesPepExpectedRemoteAddress
mscAal1CesPepExpectedRemoteAddress
Module: Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesPepExpectedRemoteAddress
OID (numeric): 1.3.6.1.4.1.562.36.2.1.119.4.10.1.1
Node type: OBJECT-TYPE
Type: AsciiString
Access: read-write
Description: This attribute specifies the expected remote address prefix for an incoming connection setup request.
If expectedRemoteAddress is not empty, only matching connections will be considered for acceptance. If expectedRemoteAddress is 40 characters long, the remote address must match exactly to be accepted. If expectedRemoteAddress is less than 40 characters long, the remote address must begin with expectedRemoteAddress to be accepted.
If expectedRemoteAddress is empty, the component will process connection requests from any remote address.
What is mscAal1CesPepExpectedRemoteAddress?
An address prefix filter for incoming setup requests to this passive end point: if non-empty, only connections whose remote address matches (exactly, if 40 characters, or as a prefix otherwise) will be accepted; empty means accept requests from any remote address.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.119.4.10.1.1 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesPepExpectedRemoteAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.119.4.10.1.1.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesPepExpectedRemoteAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.119.4.10.1.1.1 s <value>
Start monitoring Nortel MsCarrier MscPassport ATM switch (AAL1 Circuit Emulation Service) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesPepExpectedRemoteAddress OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport ATM switch (AAL1 Circuit Emulation Service) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.119 | mscAal1Ces | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.119.4 | mscAal1CesPep | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.119.4.10 | mscAal1CesPepProvEndPointAddrTable | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.119.4.10.1 | mscAal1CesPepProvEndPointAddrEntry | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.119.4.10.1.1 | mscAal1CesPepExpectedRemoteAddress | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |