Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB :: mscAal1CesLCoRetryCount

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB › mscAal1CesLCoRetryCount

mscAal1CesLCoRetryCount

Module: Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesLCoRetryCount

OID (numeric): 1.3.6.1.4.1.562.36.2.1.119.5.10.1.18

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This attribute is the count of the number of times the path chosen during route selection could not be instantiated. This count should be three or below if the network is performing adequately. A high value indicates that the route selection is often performed using an out-of-date view of available network bandwidth and/or topology. This attribute will only increase at the calling end of the connection. This attribute is reset each time a path reconnects and stops counting when it reaches its maximum value.

What is mscAal1CesLCoRetryCount?

Counts how many times route selection picked a path that then could not actually be instantiated; values above roughly three suggest the route selector is working from stale bandwidth/topology data. Only increments at the calling end and resets whenever the path reconnects.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.119.5.10.1.18
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesLCoRetryCount

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.119.5.10.1.18.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesLCoRetryCount.1

Start monitoring Nortel MsCarrier MscPassport ATM switch (AAL1 Circuit Emulation Service) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesLCoRetryCount OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport ATM switch (AAL1 Circuit Emulation Service) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.119mscAal1CesNortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
1.3.6.1.4.1.562.36.2.1.119.5mscAal1CesLCoNortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
1.3.6.1.4.1.562.36.2.1.119.5.10mscAal1CesLCoPathDataTableNortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
1.3.6.1.4.1.562.36.2.1.119.5.10.1mscAal1CesLCoPathDataEntryNortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
1.3.6.1.4.1.562.36.2.1.119.5.10.1.18mscAal1CesLCoRetryCountNortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB