All MIBs › Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB › mscAal1CesLCoOverrideRemoteName
mscAal1CesLCoOverrideRemoteName
Module: Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesLCoOverrideRemoteName
OID (numeric): 1.3.6.1.4.1.562.36.2.1.119.5.10.1.2
Node type: OBJECT-TYPE
Type: AsciiString
Access: read-write
Description: If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this attribute and then lock/unlock the service component which will result in this new overrideRemoteName being used as if it had been provisioned into the PLC remoteName. The advantage of this attribute is that the connection's remoteName can be changed immediately without having to 'activate prov' but the disadvantage is that the overrideRemoteName is not permanent and if the card or switch is reset the override will be lost.
What is mscAal1CesLCoOverrideRemoteName?
Lets an operator supply a temporary remote name to use when the underlying PLC's remoteName is blank, without editing permanent provisioning; the override takes effect on a lock/unlock cycle of the service but is lost on a card or switch reset.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.119.5.10.1.2 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesLCoOverrideRemoteName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.119.5.10.1.2.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesLCoOverrideRemoteName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.119.5.10.1.2.1 s <value>
Start monitoring Nortel MsCarrier MscPassport ATM switch (AAL1 Circuit Emulation Service) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesLCoOverrideRemoteName OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport ATM switch (AAL1 Circuit Emulation Service) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.119 | mscAal1Ces | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.119.5 | mscAal1CesLCo | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.119.5.10 | mscAal1CesLCoPathDataTable | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.119.5.10.1 | mscAal1CesLCoPathDataEntry | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.119.5.10.1.2 | mscAal1CesLCoOverrideRemoteName | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |