Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB :: mscAal1CesLCoBumpPreference

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB › mscAal1CesLCoBumpPreference

mscAal1CesLCoBumpPreference

Module: Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesLCoBumpPreference

OID (numeric): 1.3.6.1.4.1.562.36.2.1.119.5.10.1.23

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute specifies when bumping will occur during route selection process. Bumping may occur when necessary or always. It will be necessary for a connection to bump if there is not enough resources for the connection to be established and these resources are occupied by a connection whose setupPriority is lower (numerically higher) than the connection's setupPriority. A connection may also always bump in order to obtain the best route.

What is mscAal1CesLCoBumpPreference?

Controls when this connection is allowed to bump a lower-priority connection off a trunk to get resources: bumpWhenNecessary only bumps if required to establish the connection, while bumpToObtainBestRoute will bump even just to get a better route.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.119.5.10.1.23
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesLCoBumpPreference

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.119.5.10.1.23.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesLCoBumpPreference.1

Start monitoring Nortel MsCarrier MscPassport ATM switch (AAL1 Circuit Emulation Service) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesLCoBumpPreference OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport ATM switch (AAL1 Circuit Emulation Service) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.119mscAal1CesNortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
1.3.6.1.4.1.562.36.2.1.119.5mscAal1CesLCoNortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
1.3.6.1.4.1.562.36.2.1.119.5.10mscAal1CesLCoPathDataTableNortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
1.3.6.1.4.1.562.36.2.1.119.5.10.1mscAal1CesLCoPathDataEntryNortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
1.3.6.1.4.1.562.36.2.1.119.5.10.1.23mscAal1CesLCoBumpPreferenceNortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB