All MIBs › Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB › mscAal1CesAepSvcStatus
mscAal1CesAepSvcStatus
Module: Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesAepSvcStatus
OID (numeric): 1.3.6.1.4.1.562.36.2.1.119.3.13.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: svcStatus indicates the status of the incoming and outgoing connections.
When this attribute has the value initialising, it indicates that the component is initialising when first created; a connection has not been established, and no incoming setup requests will be processed.
When this attribute has the value connecting, it indicates that a connection has not yet been established, but that incoming setup requests will be processed.
When this attribute has the value connected, it indicates that a connection has been established.
When this attribute has the value retriesExhausted, it indicates that retryLimit consecutive connection setup attempts have failed, and the connection procedure has been aborted.
When this attribute has the value idle, it indicates that a connection has not been established, and that no incoming setup requests will be processed.
When this attribute has the value failed, it indicates that the connections is in a state other than those described above.
What is mscAal1CesAepSvcStatus?
Tracks the state of this active end point's connection lifecycle: initialising just after creation, connecting once it will accept incoming setups, connected once a call is up, retriesExhausted if retryLimit was hit, idle when down and not accepting setups, or failed for anything else.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.119.3.13.1.1 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesAepSvcStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.119.3.13.1.1.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesAepSvcStatus.1
Start monitoring Nortel MsCarrier MscPassport ATM switch (AAL1 Circuit Emulation Service) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB::mscAal1CesAepSvcStatus OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport ATM switch (AAL1 Circuit Emulation Service) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.119 | mscAal1Ces | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.119.3 | mscAal1CesAep | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.119.3.13 | mscAal1CesAepOutTable | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.119.3.13.1 | mscAal1CesAepOutEntry | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |
| 1.3.6.1.4.1.562.36.2.1.119.3.13.1.1 | mscAal1CesAepSvcStatus | Nortel-MsCarrier-MscPassport-CircuitEmulationServiceMIB |