All MIBs › Nortel-MsCarrier-MscPassport-BitTransparentMIB › mscBtdsPlcRequiredTxBandwidth
mscBtdsPlcRequiredTxBandwidth
Module: Nortel-MsCarrier-MscPassport-BitTransparentMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsPlcRequiredTxBandwidth
OID (numeric): 1.3.6.1.4.1.562.36.2.1.81.3.10.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute gives the bandwidth (in bits per second) reserved by a path on each of the trunks of its route. This attribute represents the bandwidth for traffic outgoing to the remote end point. This value should be chosen to achieve the amount of statistical bandwidth sharing that is desired by the network administration. This reservation is not enforced and is used to determine how many paths can be supported on a trunk. Both ends should be provisioned with the correct values allowing for the fact that Transmit at this end represents Receive at the remote end. Note that when the values do not correspond the originating end of the connection determines the value.
What is mscBtdsPlcRequiredTxBandwidth?
The bandwidth, in bits per second (default 64000), this path reserves on each trunk in its route for traffic transmitted toward the remote end point.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.81.3.10.1.5 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsPlcRequiredTxBandwidth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.81.3.10.1.5.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsPlcRequiredTxBandwidth.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.81.3.10.1.5.1 i <value>
Start monitoring Nortel Passport (MsCarrier/MscPassport) multiservice WAN switch (bit-transparent circuit emulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsPlcRequiredTxBandwidth OID value, configure state conditions and alerts, and monitor any Nortel Passport (MsCarrier/MscPassport) multiservice WAN switch (bit-transparent circuit emulation) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.81 | mscBtds | Nortel-MsCarrier-MscPassport-BitTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.81.3 | mscBtdsPlc | Nortel-MsCarrier-MscPassport-BitTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.81.3.10 | mscBtdsPlcProvTable | Nortel-MsCarrier-MscPassport-BitTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1 | mscBtdsPlcProvEntry | Nortel-MsCarrier-MscPassport-BitTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.5 | mscBtdsPlcRequiredTxBandwidth | Nortel-MsCarrier-MscPassport-BitTransparentMIB |