Nortel-MsCarrier-MscPassport-BitTransparentMIB :: mscBtdsPlcRequiredCustomerParm

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-BitTransparentMIB › mscBtdsPlcRequiredCustomerParm

mscBtdsPlcRequiredCustomerParm

Module: Nortel-MsCarrier-MscPassport-BitTransparentMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsPlcRequiredCustomerParm

OID (numeric): 1.3.6.1.4.1.562.36.2.1.81.3.10.1.10

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute indicates the allowed customer defined parameter of the trunks on the route. Its value, a number from zero to seven, is chosen by network administration to have a meaning specific to their network, thus allowing them to customize the use of their trunks. A complementary trunk attribute, customerParameter, also has a value from zero to seven. The route selection process does not consider trunks whose customerParameter is greater than the requiredCustomerParameter of the path.

What is mscBtdsPlcRequiredCustomerParm?

The customer-defined trunk parameter value (0-7, default 4) this path's route requires; route selection excludes trunks whose customerParameter exceeds it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.81.3.10.1.10
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsPlcRequiredCustomerParm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.81.3.10.1.10.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsPlcRequiredCustomerParm.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.81.3.10.1.10.1 i <value>

Start monitoring Nortel Passport (MsCarrier/MscPassport) multiservice WAN switch (bit-transparent circuit emulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsPlcRequiredCustomerParm OID value, configure state conditions and alerts, and monitor any Nortel Passport (MsCarrier/MscPassport) multiservice WAN switch (bit-transparent circuit emulation) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.81mscBtdsNortel-MsCarrier-MscPassport-BitTransparentMIB
1.3.6.1.4.1.562.36.2.1.81.3mscBtdsPlcNortel-MsCarrier-MscPassport-BitTransparentMIB
1.3.6.1.4.1.562.36.2.1.81.3.10mscBtdsPlcProvTableNortel-MsCarrier-MscPassport-BitTransparentMIB
1.3.6.1.4.1.562.36.2.1.81.3.10.1mscBtdsPlcProvEntryNortel-MsCarrier-MscPassport-BitTransparentMIB
1.3.6.1.4.1.562.36.2.1.81.3.10.1.10mscBtdsPlcRequiredCustomerParmNortel-MsCarrier-MscPassport-BitTransparentMIB