All MIBs › Nortel-MsCarrier-MscPassport-BitTransparentMIB › mscBtdsPlcPathFailureAction
mscBtdsPlcPathFailureAction
Module: Nortel-MsCarrier-MscPassport-BitTransparentMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsPlcPathFailureAction
OID (numeric): 1.3.6.1.4.1.562.36.2.1.81.3.10.1.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute is used to specify whether the application can tolerate momentary interruption of a path while a new path is selected. If disconnectConnection is chosen, the application is informed as soon as possible about a failure by disconnection. If the attribute is set to reRoutePath, the path may attempt an immediate reroute, provided the failure is a recoverable failure. If rerouting fails the application is informed of the failure. With this option set to reRoutePath the LCo may wait up to 30 seconds before informing the service of complete disconnection in order to allow both ends to attempt to reconnect. Note that if PLC components are different at both ends only the calling end is allowed to reconnect. All pathTypes respect this attribute. Also on a manualPath with both ends provisioned with independent paths (at least with respect to the failure) this option will have the desired effect that the path is rerouted without complete disconnection at both ends.
What is mscBtdsPlcPathFailureAction?
Whether this connection disconnects immediately on a path failure (disconnectConnection) or first attempts an automatic reroute before giving up (reRoutePath, the default).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.81.3.10.1.17 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsPlcPathFailureAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.81.3.10.1.17.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsPlcPathFailureAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.81.3.10.1.17.1 i <value>
Start monitoring Nortel Passport (MsCarrier/MscPassport) multiservice WAN switch (bit-transparent circuit emulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsPlcPathFailureAction OID value, configure state conditions and alerts, and monitor any Nortel Passport (MsCarrier/MscPassport) multiservice WAN switch (bit-transparent circuit emulation) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.81 | mscBtds | Nortel-MsCarrier-MscPassport-BitTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.81.3 | mscBtdsPlc | Nortel-MsCarrier-MscPassport-BitTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.81.3.10 | mscBtdsPlcProvTable | Nortel-MsCarrier-MscPassport-BitTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1 | mscBtdsPlcProvEntry | Nortel-MsCarrier-MscPassport-BitTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.17 | mscBtdsPlcPathFailureAction | Nortel-MsCarrier-MscPassport-BitTransparentMIB |