Nortel-MsCarrier-MscPassport-BitTransparentMIB :: mscBtdsPlcMaximumAcceptableCost

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-BitTransparentMIB › mscBtdsPlcMaximumAcceptableCost

mscBtdsPlcMaximumAcceptableCost

Module: Nortel-MsCarrier-MscPassport-BitTransparentMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsPlcMaximumAcceptableCost

OID (numeric): 1.3.6.1.4.1.562.36.2.1.81.3.10.1.12

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute indicates an upper bound on the cost metric of a route, which is the sum of the cost metrics of all trunks on the route. The cost metric is the trunkCost attribute of the Trunk component. If for any trunk the trunkCost is larger than the maximumAcceptableCost, then that trunk is not considered during the route selection. While a shortest route is being selected, the route cost is being compared with the maximumAcceptableCost attribute, and this is done for any minimization criterion. No route is selected if the cost metric of the shortest route is larger than the maximumAcceptableCost.

What is mscBtdsPlcMaximumAcceptableCost?

The upper bound (0-65535, default 1280) on a route's total cost metric; no route is selected if even the shortest candidate exceeds this.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.81.3.10.1.12
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsPlcMaximumAcceptableCost

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.81.3.10.1.12.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsPlcMaximumAcceptableCost.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.81.3.10.1.12.1 i <value>

Start monitoring Nortel Passport (MsCarrier/MscPassport) multiservice WAN switch (bit-transparent circuit emulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsPlcMaximumAcceptableCost OID value, configure state conditions and alerts, and monitor any Nortel Passport (MsCarrier/MscPassport) multiservice WAN switch (bit-transparent circuit emulation) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.81mscBtdsNortel-MsCarrier-MscPassport-BitTransparentMIB
1.3.6.1.4.1.562.36.2.1.81.3mscBtdsPlcNortel-MsCarrier-MscPassport-BitTransparentMIB
1.3.6.1.4.1.562.36.2.1.81.3.10mscBtdsPlcProvTableNortel-MsCarrier-MscPassport-BitTransparentMIB
1.3.6.1.4.1.562.36.2.1.81.3.10.1mscBtdsPlcProvEntryNortel-MsCarrier-MscPassport-BitTransparentMIB
1.3.6.1.4.1.562.36.2.1.81.3.10.1.12mscBtdsPlcMaximumAcceptableCostNortel-MsCarrier-MscPassport-BitTransparentMIB