Nortel-MsCarrier-MscPassport-BitTransparentMIB :: mscBtdsLCoRetryCount

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-BitTransparentMIB › mscBtdsLCoRetryCount

mscBtdsLCoRetryCount

Module: Nortel-MsCarrier-MscPassport-BitTransparentMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsLCoRetryCount

OID (numeric): 1.3.6.1.4.1.562.36.2.1.81.4.10.1.18

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This attribute is the count of the number of times the path chosen during route selection could not be instantiated. This count should be three or below if the network is performing adequately. A high value indicates that the route selection is often performed using an out-of-date view of available network bandwidth and/or topology. This attribute will only increase at the calling end of the connection. This attribute is reset each time a path reconnects and stops counting when it reaches its maximum value.

What is mscBtdsLCoRetryCount?

Counts how many times route selection picked a path for this connection that could not actually be instantiated; a high value suggests the network view used for route selection is stale. Only increments at the calling end and resets on each reconnect.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.81.4.10.1.18
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsLCoRetryCount

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.81.4.10.1.18.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsLCoRetryCount.1

Start monitoring Nortel Passport (MsCarrier/MscPassport) multiservice WAN switch (bit-transparent circuit emulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsLCoRetryCount OID value, configure state conditions and alerts, and monitor any Nortel Passport (MsCarrier/MscPassport) multiservice WAN switch (bit-transparent circuit emulation) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.81mscBtdsNortel-MsCarrier-MscPassport-BitTransparentMIB
1.3.6.1.4.1.562.36.2.1.81.4mscBtdsLCoNortel-MsCarrier-MscPassport-BitTransparentMIB
1.3.6.1.4.1.562.36.2.1.81.4.10mscBtdsLCoPathDataTableNortel-MsCarrier-MscPassport-BitTransparentMIB
1.3.6.1.4.1.562.36.2.1.81.4.10.1mscBtdsLCoPathDataEntryNortel-MsCarrier-MscPassport-BitTransparentMIB
1.3.6.1.4.1.562.36.2.1.81.4.10.1.18mscBtdsLCoRetryCountNortel-MsCarrier-MscPassport-BitTransparentMIB