All MIBs › Nortel-MsCarrier-MscPassport-BitTransparentMIB › mscBtdsLCoOverrideRemoteName
mscBtdsLCoOverrideRemoteName
Module: Nortel-MsCarrier-MscPassport-BitTransparentMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsLCoOverrideRemoteName
OID (numeric): 1.3.6.1.4.1.562.36.2.1.81.4.10.1.2
Node type: OBJECT-TYPE
Type: AsciiString
Access: read-write
Description: If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this attribute and then lock/unlock the service component which will result in this new overrideRemoteName being used as if it had been provisioned into the PLC remoteName. The advantage of this attribute is that the connection's remoteName can be changed immediately without having to 'activate prov' but the disadvantage is that the overrideRemoteName is not permanent and if the card or switch is reset the override will be lost.
What is mscBtdsLCoOverrideRemoteName?
A temporary remote-name override applied when the PLC's own remoteName is blank; taking effect requires a lock/unlock of the service, and it's lost on a card or switch reset since it isn't persisted like normal provisioning.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.81.4.10.1.2 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsLCoOverrideRemoteName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.81.4.10.1.2.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsLCoOverrideRemoteName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.81.4.10.1.2.1 s <value>
Start monitoring Nortel Passport (MsCarrier/MscPassport) multiservice WAN switch (bit-transparent circuit emulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsLCoOverrideRemoteName OID value, configure state conditions and alerts, and monitor any Nortel Passport (MsCarrier/MscPassport) multiservice WAN switch (bit-transparent circuit emulation) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.81 | mscBtds | Nortel-MsCarrier-MscPassport-BitTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.81.4 | mscBtdsLCo | Nortel-MsCarrier-MscPassport-BitTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.81.4.10 | mscBtdsLCoPathDataTable | Nortel-MsCarrier-MscPassport-BitTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.81.4.10.1 | mscBtdsLCoPathDataEntry | Nortel-MsCarrier-MscPassport-BitTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.81.4.10.1.2 | mscBtdsLCoOverrideRemoteName | Nortel-MsCarrier-MscPassport-BitTransparentMIB |