All MIBs › Nortel-MsCarrier-MscPassport-BitTransparentMIB › mscBtdsFramerProtocol
mscBtdsFramerProtocol
Module: Nortel-MsCarrier-MscPassport-BitTransparentMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsFramerProtocol
OID (numeric): 1.3.6.1.4.1.562.36.2.1.81.2.11.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the ingress frames suppressed by this Btds. If protocol is none, this Btds does not suppress any ingress frames. If protocol is hdlc, this Btds suppresses ingress frames where each byte is an identical non-inverted hdlc idle pattern, but only after two or more consecutive frames meet this description. If protocol is nrziHdlc, this Btds suppresses ingress frames where each byte is an identical NRZI encoded hdlc idle pattern, but only after two or more consecutive frames meet this description. If protocol is universal, this Btds suppresses ingress frames where each 16-bit word is identical, but only after a provisionable number of consecutive frames meet this description. The number of consecutive frames is determined by numOfIdleBytesToMonitor. Note that the number of idle bytes suppressed at the ingress side does not necessarily equal the number of idle bytes generated at the egress side.
It is a semantic check warning if protocol is hdlc, nrziHdlc or universal and this Btds is running on a 1pE1Mvp, 1pDS1Mvp or 1pTTC2mMvp card.
What is mscBtdsFramerProtocol?
Selects which idle-frame suppression scheme this Btds uses on ingress: none, hdlc, nrziHdlc, or universal; universal mode uses mscBtdsFramerNumOfIdleBytesToMonitor to decide how many repeated words define an idle frame.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.81.2.11.1.7 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsFramerProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.81.2.11.1.7.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsFramerProtocol.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.81.2.11.1.7.1 i <value>
Start monitoring Nortel Passport (MsCarrier/MscPassport) multiservice WAN switch (bit-transparent circuit emulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-BitTransparentMIB::mscBtdsFramerProtocol OID value, configure state conditions and alerts, and monitor any Nortel Passport (MsCarrier/MscPassport) multiservice WAN switch (bit-transparent circuit emulation) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.81 | mscBtds | Nortel-MsCarrier-MscPassport-BitTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.81.2 | mscBtdsFramer | Nortel-MsCarrier-MscPassport-BitTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.81.2.11 | mscBtdsFramerChannelTable | Nortel-MsCarrier-MscPassport-BitTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.81.2.11.1 | mscBtdsFramerChannelEntry | Nortel-MsCarrier-MscPassport-BitTransparentMIB |
| 1.3.6.1.4.1.562.36.2.1.81.2.11.1.7 | mscBtdsFramerProtocol | Nortel-MsCarrier-MscPassport-BitTransparentMIB |