Nortel-MsCarrier-MscPassport-AtmTrunksMIB :: mscTrkAtmBwElastic

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-AtmTrunksMIB › mscTrkAtmBwElastic

mscTrkAtmBwElastic

Module: Nortel-MsCarrier-MscPassport-AtmTrunksMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmTrunksMIB::mscTrkAtmBwElastic

OID (numeric): 1.3.6.1.4.1.562.36.2.1.60.3.11.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies how changes in the bandwidth of the atmConnection are handled by the ATM software. If its value is no, the atmConnection will be released by the ATM software if it is incapable of providing the bandwidth specified by the peak cell rate (PCR) defined in txTrafficDescParm of AtmIf Vcc Vcd. If the value is yes, the atmConnection is not released in this situation, but its bandwidth may be reduced. Also, if this value is yes, the Dynamic Speed Reporting mechanism must be enabled, by provisioning at least one value in the speedReportingThresholds attribute of the parent Trunk component.

What is mscTrkAtmBwElastic?

Controls whether the ATM connection is released when it can no longer provide the peak cell rate it was provisioned for: no(0, default) releases the connection in that case, while yes(1) keeps it up with reduced bandwidth instead, but requires Dynamic Speed Reporting to also be enabled on the parent trunk.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.60.3.11.1.2
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmTrunksMIB::mscTrkAtmBwElastic

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.60.3.11.1.2.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmTrunksMIB::mscTrkAtmBwElastic.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.60.3.11.1.2.1 i <value>

Start monitoring Nortel Magellan/MsCarrier Passport wide-area switching platform (ATM trunk component) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmTrunksMIB::mscTrkAtmBwElastic OID value, configure state conditions and alerts, and monitor any Nortel Magellan/MsCarrier Passport wide-area switching platform (ATM trunk component) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.60mscTrkNortel-MsCarrier-MscPassport-TrunksMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.60.3mscTrkAtmNortel-MsCarrier-MscPassport-AtmTrunksMIB
1.3.6.1.4.1.562.36.2.1.60.3.11mscTrkAtmInterfaceTableNortel-MsCarrier-MscPassport-AtmTrunksMIB
1.3.6.1.4.1.562.36.2.1.60.3.11.1mscTrkAtmInterfaceEntryNortel-MsCarrier-MscPassport-AtmTrunksMIB
1.3.6.1.4.1.562.36.2.1.60.3.11.1.2mscTrkAtmBwElasticNortel-MsCarrier-MscPassport-AtmTrunksMIB