All MIBs › Nortel-MsCarrier-MscPassport-ApsMIB › mscApsRevertive
mscApsRevertive
Module: Nortel-MsCarrier-MscPassport-ApsMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-ApsMIB::mscApsRevertive
OID (numeric): 1.3.6.1.4.1.562.36.2.1.134.11.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies whether revertive switching is to be used. It has possible values of no or yes.
When this attribute is no, the Aps will not revert the receive active line from protection back to working when a working line request is cleared.
When this attribute is yes, the Aps will revert the receive active line from protection back to working when a working line request is cleared, after the provisioned waitToRestorePeriod has expired.
Note that it is acceptable for the near end and far end to be provisioned with a mix of revertive and nonrevertive switching.
What is mscApsRevertive?
This read-write value (no/yes, default no) controls whether APS automatically reverts the active line from protection back to working once the working line recovers and the wait-to-restore period expires. Set this to yes if you want traffic to automatically move back to the primary (working) line after a fault clears, rather than staying on protection indefinitely.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.134.11.1.5 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-ApsMIB::mscApsRevertive
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.134.11.1.5.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-ApsMIB::mscApsRevertive.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.134.11.1.5.1 i <value>
Start monitoring Nortel MsCarrier MscPassport switch (SONET Automatic Protection Switching) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-ApsMIB::mscApsRevertive OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch (SONET Automatic Protection Switching) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.134 | mscAps | Nortel-MsCarrier-MscPassport-ApsMIB |
| 1.3.6.1.4.1.562.36.2.1.134.11 | mscApsProvTable | Nortel-MsCarrier-MscPassport-ApsMIB |
| 1.3.6.1.4.1.562.36.2.1.134.11.1 | mscApsProvEntry | Nortel-MsCarrier-MscPassport-ApsMIB |
| 1.3.6.1.4.1.562.36.2.1.134.11.1.5 | mscApsRevertive | Nortel-MsCarrier-MscPassport-ApsMIB |