Nortel-Magellan-Passport-X25DteMIB :: x25DtePleX25AddrToEncLkupFlrs

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-X25DteMIB › x25DtePleX25AddrToEncLkupFlrs

x25DtePleX25AddrToEncLkupFlrs

Module: Nortel-Magellan-Passport-X25DteMIB

OID (symbolic): Nortel-Magellan-Passport-X25DteMIB::x25DtePleX25AddrToEncLkupFlrs

OID (numeric): 1.3.6.1.4.1.562.2.4.1.90.6.11.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This attribute indicates the number of times a translation attempt from an X.25 address to an Encapsulation address failed to find a corresponding Encapsulation address. Such a failure could occur when a incoming call received from the link by the X.25 DTE is directed to a specific RemoteGroup because the called address matches the localAddress attribute of the RemoteGroup component. If the RemoteGroup component does not have a Peer component linked in its linkToPeer attribute list, with the x25Address attribute equal to the calling address from the incoming call packet, there is no appropriate Peer component, so the call is cleared and this counter is incremented.

What is x25DtePleX25AddrToEncLkupFlrs?

Counts how many times an incoming call's X.25 calling address couldn't be matched to a known encapsulation address, because no Peer component under the target RemoteGroup had a matching x25Address -- causing the call to be cleared.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.90.6.11.1.4
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-X25DteMIB::x25DtePleX25AddrToEncLkupFlrs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.90.6.11.1.4.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-X25DteMIB::x25DtePleX25AddrToEncLkupFlrs.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> x25DtePleX25AddrToEncLkupFlrs.1

Start monitoring Nortel Magellan Passport WAN switch (X.25 DTE service) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-X25DteMIB::x25DtePleX25AddrToEncLkupFlrs OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (X.25 DTE service) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.90x25DteNortel-Magellan-Passport-X25DteMIB
1.3.6.1.4.1.562.2.4.1.90.6x25DtePleNortel-Magellan-Passport-X25DteMIB
1.3.6.1.4.1.562.2.4.1.90.6.11x25DtePleOpTableNortel-Magellan-Passport-X25DteMIB
1.3.6.1.4.1.562.2.4.1.90.6.11.1x25DtePleOpEntryNortel-Magellan-Passport-X25DteMIB
1.3.6.1.4.1.562.2.4.1.90.6.11.1.4x25DtePleX25AddrToEncLkupFlrsNortel-Magellan-Passport-X25DteMIB