Nortel-Magellan-Passport-X25DteMIB :: x25DtePleEncAddrToX25LkupFlrs

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-X25DteMIB › x25DtePleEncAddrToX25LkupFlrs

x25DtePleEncAddrToX25LkupFlrs

Module: Nortel-Magellan-Passport-X25DteMIB

OID (symbolic): Nortel-Magellan-Passport-X25DteMIB::x25DtePleEncAddrToX25LkupFlrs

OID (numeric): 1.3.6.1.4.1.562.2.4.1.90.6.11.1.1

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This attribute indicates the number of times a translation attempt from an Encapsulation address to an X.25 address failed to find a corresponding X.25 address. Such a failure could occur when a Protocol Port, linked to a RemoteGroup via the linkToProtocolPort attribute of the RemoteGroup, requests through the software that a X.25 call be established to a particular Encapsulation address. If the RemoteGroup does not have a Peer component linked in its linkToPeer attribute list, with the encAddress attribute equal to the Encapsulation address specified, this counter will be incremented, because the corresponding Peer component needed to establish an X.25 connection was not found.

What is x25DtePleEncAddrToX25LkupFlrs?

Counts how many times the interface failed to translate an Encapsulation (IP) address into an X.25 address when trying to place a call on behalf of a Protocol Port -- happening when no Peer component's encAddress matches the requested destination -- indicating a missing or misconfigured Peer entry.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.90.6.11.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-X25DteMIB::x25DtePleEncAddrToX25LkupFlrs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.90.6.11.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-X25DteMIB::x25DtePleEncAddrToX25LkupFlrs.1

Start monitoring Nortel Magellan Passport WAN switch (X.25 DTE service) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-X25DteMIB::x25DtePleEncAddrToX25LkupFlrs OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (X.25 DTE service) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.90x25DteNortel-Magellan-Passport-X25DteMIB
1.3.6.1.4.1.562.2.4.1.90.6x25DtePleNortel-Magellan-Passport-X25DteMIB
1.3.6.1.4.1.562.2.4.1.90.6.11x25DtePleOpTableNortel-Magellan-Passport-X25DteMIB
1.3.6.1.4.1.562.2.4.1.90.6.11.1x25DtePleOpEntryNortel-Magellan-Passport-X25DteMIB
1.3.6.1.4.1.562.2.4.1.90.6.11.1.1x25DtePleEncAddrToX25LkupFlrsNortel-Magellan-Passport-X25DteMIB