Nortel-Magellan-Passport-X25DteMIB :: x25DtePeerLinkToRemoteGroup

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-X25DteMIB › x25DtePeerLinkToRemoteGroup

x25DtePeerLinkToRemoteGroup

Module: Nortel-Magellan-Passport-X25DteMIB

OID (symbolic): Nortel-Magellan-Passport-X25DteMIB::x25DtePeerLinkToRemoteGroup

OID (numeric): 1.3.6.1.4.1.562.2.4.1.90.2.10.1.4

Node type: OBJECT-TYPE

Type: Link

Access: read-write

Description: This is a link to a RemoteGroup component. The RemoteGroup components logically divide up the X.25 Interface such that a number of Protocol Ports (and consequently a number of Virtual Routers) may share the same X.25 Interface into a Wide Area Network. In particular, the remote host identified by this Peer component is designated as belonging to the RemoteGroup linked by this attribute. The set of all Peer components and PermLcn components which link to a given RemoteGroup determine the subset of remote hosts which are accessible to a particular Protocol Port (and ultimately a Virtual Router).

What is x25DtePeerLinkToRemoteGroup?

Links this Peer component to a specific RemoteGroup, designating which subset of Protocol Ports/Virtual Routers can reach the remote host defined by this Peer over the shared X.25 interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.90.2.10.1.4
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-X25DteMIB::x25DtePeerLinkToRemoteGroup

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.90.2.10.1.4.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-X25DteMIB::x25DtePeerLinkToRemoteGroup.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.90.2.10.1.4.1 s <value>

Start monitoring Nortel Magellan Passport WAN switch (X.25 DTE service) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-X25DteMIB::x25DtePeerLinkToRemoteGroup OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (X.25 DTE service) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.90x25DteNortel-Magellan-Passport-X25DteMIB
1.3.6.1.4.1.562.2.4.1.90.2x25DtePeerNortel-Magellan-Passport-X25DteMIB
1.3.6.1.4.1.562.2.4.1.90.2.10x25DtePeerIfTableNortel-Magellan-Passport-X25DteMIB
1.3.6.1.4.1.562.2.4.1.90.2.10.1x25DtePeerIfEntryNortel-Magellan-Passport-X25DteMIB
1.3.6.1.4.1.562.2.4.1.90.2.10.1.4x25DtePeerLinkToRemoteGroupNortel-Magellan-Passport-X25DteMIB