Nortel-Magellan-Passport-VncsCallServerMIB :: vncsVpV17EncodedAsG711G726

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-Magellan-Passport-VncsCallServerMIBvncsVpV17EncodedAsG711G726

vncsVpV17EncodedAsG711G726

Module: Nortel-Magellan-Passport-VncsCallServerMIB

OID (symbolic): Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpV17EncodedAsG711G726

OID (numeric): 1.3.6.1.4.1.562.2.4.1.44.3.3.1.20

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies how services using this VoiceProfile negotiate with V.17 fax machines. This attribute is not used unless the negotiated fax encoding, available in Vsr Svs Framer negotiatedEncoding, is v29V27Relay and the negotiated modemFax encoding, available in Vsr Svs Framer negotiatedEncoding, is g711, g726 or g711G726.

If v17EncodedAsG711G726 is no, it is desired that V.17 fax machines be instructed to use V.29 so that V.29 fax traffic sent by fax machines can be demodulated and encoded using fax relay.

If v17EncodedAsG711G726 is yes, it is desired that V.17 fax machines be permitted to use V.17 so that V.17 fax traffic sent by fax machines can be encoded using G.711 or G.726. The actual encoding performed depends on the negotiated minimum and maximum modemFax rates, available in Vsr Svs Framer negotiatedRates.

The actual negotiation between services using this VoiceProfile and V.17 fax machines is available in Vsr Svs Framer negotiatedV17AsG711G726.

What is vncsVpV17EncodedAsG711G726?

This controls how V.17 fax machines are handled when negotiated encoding is v29V27Relay and the modemFax encoding is g711/g726/g711G726: no(0, the default, instruct V.17 machines to fall back to V.29 for fax relay) or yes(1, permit V.17 to be carried uncompressed via G.711/G.726 instead). Admins set yes when V.17 fax traffic needs full-rate fidelity rather than being downgraded to V.29 relay.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.44.3.3.1.20
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpV17EncodedAsG711G726

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.44.3.3.1.20.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpV17EncodedAsG711G726.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.44.3.3.1.20.1 i <value>

Start monitoring Nortel Magellan Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpV17EncodedAsG711G726 OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switches from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.44vncsNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.3vncsVpNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.3.3vncsVpFrOpsTableNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.3.3.1vncsVpFrOpsEntryNortel-Magellan-Passport-VncsCallServerMIB
1.3.6.1.4.1.562.2.4.1.44.3.3.1.20vncsVpV17EncodedAsG711G726Nortel-Magellan-Passport-VncsCallServerMIB