All MIBs › Nortel-Magellan-Passport-VncsCallServerMIB › vncsVpSilenceSuppressionFactor
vncsVpSilenceSuppressionFactor
Module: Nortel-Magellan-Passport-VncsCallServerMIB
OID (symbolic): Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpSilenceSuppressionFactor
OID (numeric): 1.3.6.1.4.1.562.2.4.1.44.3.3.1.8
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the expected savings (percent reduction) in required bandwidth if silence suppression is used. If silence suppression is used, the bandwidth required for the connection will be lower than if silence suppression is not used. However, the routing system will not be aware of the unused bandwidth unless that bandwidth is specified by this attribute. If the value specified for the expected savings is too low, then some bandwidth made available by the use of silence suppression will be wasted. If the value specified for the expected savings is too high, then some connections may fail to set up because the routing system will over-calculate the amount of bandwidth available. The effectiveness of silence suppression can be influenced by language related speech patterns.
What is vncsVpSilenceSuppressionFactor?
This sets the expected bandwidth savings (0-60 percent, default 40) the routing system should assume is freed up by silence suppression on calls using this profile. Admins tune this carefully: too low wastes reclaimable bandwidth, too high risks call setup failures from over-optimistic bandwidth accounting, and the right value can depend on language-specific speech patterns.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.44.3.3.1.8 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpSilenceSuppressionFactor
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.44.3.3.1.8.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpSilenceSuppressionFactor.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.44.3.3.1.8.1 i <value>
Start monitoring Nortel Magellan Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VncsCallServerMIB::vncsVpSilenceSuppressionFactor OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.44 | vncs | Nortel-Magellan-Passport-VncsCallServerMIB |
| 1.3.6.1.4.1.562.2.4.1.44.3 | vncsVp | Nortel-Magellan-Passport-VncsCallServerMIB |
| 1.3.6.1.4.1.562.2.4.1.44.3.3 | vncsVpFrOpsTable | Nortel-Magellan-Passport-VncsCallServerMIB |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1 | vncsVpFrOpsEntry | Nortel-Magellan-Passport-VncsCallServerMIB |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.8 | vncsVpSilenceSuppressionFactor | Nortel-Magellan-Passport-VncsCallServerMIB |